SERENADE
Transform your space with the Serenade Collection, featuring fluted natural stone mosaics that evoke movement and texture. Inspired by music's harmony, each tile has concave and convex flutes, creating a captivating light and shadow play. Crafted from exquisite stones in eight rich hues, from warm red travertine to elegant Carrara marble and organic beige limestone, the collection offers natural textures that enhance both modern and classic interiors.
Products
DETAILS
Natural Stone
12.6” x 12” Mosaic Sheet
Thickness 3/8” Low Point - 1/2” High Point
Natural Finish
8.4 sf Carton / 8 Sheets
Recommended grout joint 3mm
In-Stock
APPLICATIONS
Wall
Interior & Exterior
3” Radius minimum for inside and outside curves
Natural stones are products of nature and are prone to variations in color, texture, shading, and veining that may differ from displays. Variations are not considered flaws as no two pieces of stone are alike.
-
READ BEFORE INSTALLATION: Natural stone is a product of nature, with inherent variations in color, texture, shading, and veining that may differ from samples or displays. These variations are not defects, as no two pieces of stone are identical.
Before installation:
Ensure sufficient material, including extra for waste, is purchased to complete the entire project.
Mix tiles from multiple cartons and lay them out to achieve the best blend and visual consistency.
Seal all natural stone products before grouting.
IMPORTANT: No claims will be accepted after installation.
-
Important Material Characteristics
Natural stone is inherently unique. Expect variation in:
Color
Veining
Texture
Shade movement
These variations are not defects—they are what give natural stone its character and beauty.
Initial Sealing (Required)
Per industry standards from the Natural Stone Institute:
Seal before grouting using a penetrating sealer
Apply a second coat after installation if needed
Ensure full coverage across high/low surface areas (especially important for textured mosaics)
Why it matters:
Pre-sealing helps prevent grout staining and enhances long-term performance.Routine Cleaning
Keep it simple and consistent:
DO:
Use a pH-neutral stone cleaner
Clean with a soft cloth, sponge, or microfiber mop
Rinse with clean water after washing
Dry surfaces to prevent water spots (especially in showers)
DON’T:
No acidic cleaners (vinegar, lemon, etc.)
No bleach or ammonia-based products
No abrasive pads or powders
Pro Tip:
Textured mosaics can trap residue—light, frequent cleaning works better than heavy scrubbing.Stain Prevention & Spill Care
Natural stone is porous—act fast:
Wipe spills immediately (especially oils, wine, coffee, citrus)
Blot, don’t wipe aggressively (prevents spreading)
Use a stone-safe cleaner for spot treatment
Ongoing Maintenance
Re-seal periodically (typically every 6–12 months depending on use)
High-moisture areas (showers, exteriors) may require more frequent sealing
Inspect grout lines and reseal as needed
Grout & Joint Care
Maintain recommended 3mm grout joints
Use high-quality grout suitable for wet environments if applicable
Keep grout clean to prevent discoloration or mildew
Exterior Applications
Ensure proper drainage and installation methods
Use breathable sealers to allow moisture vapor transmission
Periodically inspect for environmental buildup (dirt, algae, etc.)
Best Practices for Longevity
Avoid prolonged standing water
Use bath mats or proper ventilation in wet areas
Clean regularly to prevent buildup in textured surfaces
Always test cleaners in a small, inconspicuous area first
Installation Reminder
Blend material from multiple cartons prior to installation
Dry-lay to ensure desired visual balance
Confirm all material before install
Important:
No claims will be accepted after installation. description